Usage:
It is mainly suitable for crushing medium-hard materials with compressive strength not greater than 170MPa and surface moisture not greater than 8%. It is especially suitable for crushing brittle materials such as cement clinker, limestone, gypsum, coal gangue, slag or in the cement industry. It is designed for pre-grinding before grinding to increase mill output percentage.
Features:
1. The power consumption of this product is 50% of that of the ball mill under the same output, and the price is 1/8 of that of the roller press. Increases mill output by 100%.
2. The special connection gap of the hammer head is easy to adjust, and the discharge particle size is fine, the average is less than 1mm, accounting for 80%, and it can pass through the 1mm sieve.
3. The hammer head is made of high wear-resistant alloy material, which has good wear resistance and long service life. It can be used with adjustable head and is not afraid of high temperature.
4. There is no screen bar at the bottom, which is durable, stable in operation and good in dust-proof performance.
5. Reasonable structure, easy operation, small footprint and easy installation.
Technical Parameters
Model | Capacity(t/h) | Power(kw) | Output Size(mm) | Remark |
PCM-40 | 30~40 | 90 | 1 | 80% can pass 1mm sieve |
PCM-60 | 40~65 | 132 | 1 | 80% can pass 1mm sieve |
PCM-80 | 60~85 | 160 | 1 | 80% can pass 1mm sieve |
PCM-100 | 70~110 | 200 | 1 | 80% can pass 1mm sieve |
PCM-130 | 90~130 | 250 | 1 | 80% can pass 1mm sieve |
PCM-150 | 100~150 | 280 | 1 | 80% can pass 1mm sieve |
PCM-200 | 130~210 | 355 | 1 | 80% can pass 1mm sieve |